Router 2 would not work "Dynamips"

Issue : Router 2 would not work "Dynamips"

Product: Dynamips


Many of the engineers in our group has reported that Router 2 is not working.
They see at the console of Dynamips that it is working, but are not being able to make a console connection.

Well after investigation and some netstat commands, it comes out to be, Logmein uses port 2002 and R2 would get port 2002 from dynamips usually. As we at network-effect use logmein extensively to provide support, this is what our current stand is.

Solution:
change the port number of Router 2.
OR
exit Logmein

Exploring:
Possibility of changing port 2002 in Logmein.

Confirmed & tested symptom:

Which ever application is run first would work decently, and subsequent application will not work. Usually, as logmein is setup to run at startup, this renders dynamips Router 2, never to work.